Description

Features: * 10 strong magnetic brake beans 7+1 stainless steel bearings 6.4:1 gear speed ratio 16kg strong braking force * Alarm reminder for caught fish + screen flash * High-definition large screen displays throwing distance *Background lighting + long lasting battery life + push rod fine adjustment * Real-time Control of Outgoing Line Distance Notletting go of Every Outgoing Line * Precision and sensitive electronic chip: record the distance between the on-line and out-line and alarm the fish in the middle * 7 PE wire numbers to choose from: 2/3/4/5/6/7/8 * Fish-catching alarm system: The screen flashes and makes a sound after catching a fish. * Stronger drive gear passivated for biggest power * Upgraded tapered line outlet: Upgraded tapered line outlet can effectively reduce fishing line friction and increase casting distance * Fishing alarm: When turned on the numbers start to flash. Click the right button to turn on the fish alarm function. At this time the displayed number starts to flash. When the fish bites the bait and drags it out of the line the screen starts to flash and sounds a beep alarm. After the alarm lasts for 6 seconds the screen returns to normal. * Built-in battery USB charging interface: USB charging interface waterproof plug design waterproof more tightly * 24 gears brake adjustment 10 powerful magnet structures * Product Analysis: High Strength Grip Star Drag Outlet Hole Cast Control Knob Magnetic Brake System Instructions for use of Large Screen Digital Display Water Drop Wheel: 1. On/ Off Operation: Press and hold the left button for 2 seconds to shut down. Press and hold the left button for 2 seconds to turn on. If there is no operation within 30 minutes of power on it will automatically shut down and enter low-power consumption mode. 2. Settings: 1). In the line number setting mode the default line number for deep line cups is 2.0 and the default line number for regular cups is 2.0. Press the left power button to cycle through: regular cup PE line 2→3→4→5→6 →7→8 deep wire cup PE wire 2→3→4→5→6 →7→8. After selecting the wire number press and hold the setting button on the right for 2 seconds to automatically save the selected wire number and switch to winding. Line mode. 2). In the winding mode you can wind the length of PE as needed in this mode: Deep Line Cup: Line 0.23nn/ 390 meters 3). In the thread winding mode short press the left button to perform the reset operation to facilitate re-winding the thread. During the winding process the number will show the actual winding length. After winding the thread press and hold the setting button on the right side for 2 seconds to automatically save the length of the wrapped thread and switch to the normal working mode. (Note: In tangle mode m flashes every 0.5 seconds) 3. Retracting and Unwinding the Line in Normal Working Condition: 1). Under normal working conditions double-click the switch setting button on the left to clear it. 2). Under normal working conditions short press the setting button on the right side to set the hook alarm. The buzzer will sound once and the outlet meter will flash once every 0.5 seconds to indicate that it is on (if the fish takes the bait the background light will flash continuously and at the same time Buzzer beeps) 4. Battery Reminder: During use if the display shows low battery it means that it needs to be charged immediately and the power is not enough. 5. Charging: Plug in the charging source. If the charging indicator light is on it means charging and if it goes out red it means charging is complete. (Note: You cannot use the power display icon on the display to determine whether it is fully charged during charging.) 6. Background Lighting: Under normal working conditions double-click the setting button on the right to turn on and off the background light and only one kind of background light can be selected. When it is on the screen displays LIGHT . If there is no operation it will automatically turn off to save power. Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.